Why is my Paslode nail gun not working?
Possible causes for a Paslode nailer not firing are: A nail jam is stopping the nails from moving forward. The gas cartridge is empty, out-of-date or not attached properly. The wrong type of Paslode nails are being used.
Why is my nail gun not firing?
Jams are the most common cause of a nailer not firing. Thankfully, they are often easy to clear. For safety, first disconnect the tool from the air supply, retract the feeder mechanism, and remove any excess fasteners from the magazine. From there, clearing the jam depends on what type of nailer you have.
Why is my Paslode gun blinking red?
This is the battery indicator light. When you insert a fully-charged battery into the tool, you will see a blinking green light. If the indicator light blinks red, recharge the battery.
How do I know if my Paslode battery is bad?
Look at the lights on the charger unit – an alternating flashing red and green light means that the battery is faulty. In this instance take the battery back to the dealer that you bought it from and they should be able to help you.
Why is my nail gun only shooting air?
If you try to fire a pneumatic nail gun or stapler, but only hear air leaking when engaging the trigger, it’s likely that your tool’s “O-Ring” is not sealing properly.
Why won’t my nail gun retract?
Low air pressure can prevent the hammer from retracting properly. Damaged or Worn Parts: Inspect the nailer for any damaged or worn parts, especially in the hammer mechanism. If any parts are damaged or worn, they may need to be replaced. Lubrication: Lack of lubrication can also cause the hammer to stick.
How long is the Paslode warranty?
We’ve built our reputation on delivering durable, reliable tools. And we’re willing to back it up with the industry’s best promise: two years of free service for your Paslode cordless tools, no questions asked.
Why is my Paslode gun not firing?
Firing Issues If the nail gun isn’t firing or is firing intermittently, make sure you check the gas fuel cell you are using. It may be the gas fuel cell is not attached correctly, alternatively check the use by date. If the gas is older than the sell by date it depressurizes.
How long should a Paslode battery last?
With up to 12,000 shots for Finish Nailing Systems and 9,000 shots for Framing Nailing Systems, you can work for weeks before needing to re-charge.
What do the lights on the Paslode mean?
The red light will come on indicating that the battery is charging and the green light will go out. If battery is completely discharged the red light and the green light may flash back and forth for up to 20 minutes. This safety feature slowly recharges the battery until it is ready to accept the full charging current.
Why is the red light blinking on my Paslode nail gun?
If the lights continue to flash red/green after 20 minutes but goes to a steady green when the battery is removed, it is likely there is a problem with the battery.
Why is my nail gun not working?
If your nailer won’t fire, look for signs of damage on the following parts: the piston head valve, o-rings, seals, driver, bumper, trigger valve, and piston valve. Now that you know the part you will need to fix, read on for information on how to repair your nailer as efficiently as possible.
Does paslode fuel go bad?
This fuel cell is an excellent choice for your moulding projects as you can quickly fuel up and get to work! Paslode Fuel Cells have 27 months of shelf life, and the expiration date is printed right on the bottom of the bottle for your convenience.
Why is my nail gun hissing?
If you notice your nailer is down on power, or if you pull the trigger and nothing happens, it may have an air leak. If you hear the hissing of air from somewhere on the nailer, that’s a dead giveaway that your nailer isn’t holding pressure.
Why is my nail gun not retracting?
If your driver will not return, the first thing you should do is trying lubricating the tool. Add 5 to 6 drops of air tool oil through the air inlet. Attach the air line and fire the gun a few times to the get the lube to move all through the tool. If this does not solve the problem start trouble shooting the parts.
Why does my paslode nail gun keep jamming?
Paslode nails come in a long collated strip. If you put a split nail strip or multiple split nail strips in the nail magazine, then it can cause a nail jam. Put one full nail strip in the nail magazine at a time – don’t try to use smaller parts of a nail strip.
Can a nail gun get wet?
Avoid Moisture and Exposure Airborne particles can clog pneumatic nailers and cause undue wear to components within the tool. This is particularly true in coastal regions, where moisture and salt in the air increases the chance for system failure, rusting or corrosion.
How do you release pressure from a nail gun?
Disconnect the air supply’s quick-connect valve from the 1/4” stud on the bottom of the gun. Press the purge valve on the gun to release any excess pressure stored in the gun. Next, press and fire the gun at a scrap of wood to ensure that it will no longer fire nails.
How often do you need to service a Paslode nail gun?
Paslode recommend that you clean and lubricate your nail gun every 50,000 shots. If your nailer’s being used in a dirty environment or at high nailing rates for extended periods of time then it should be cleaned more often than this. Cleaning your nail gun is easy and it shouldn’t take any longer than 15 minutes.
Why is my Paslode Nailer not firing?
Can a Paslode Nailer be repaired?
How to repair a Paslode nail gun?
How do I know if my Paslode Nailer is working properly?
The Big Three: Common Paslode Nail Gun Issues
Most of the time, you’ll find that Paslode nail gun issues boil down to three main culprits:
Jammed Nail: This is the most common problem. It’s like a hiccup, a moment where the nail gets stuck and the gun just stops working.
Low Fuel: The fuel cell is the heart of the Paslode. When it runs low, the gun can become sluggish or stop firing altogether.
Clogged Nozzles: The nozzle is where the magic happens—the point where the nail is driven into the material. If this area gets clogged, you’re going to have a tough time firing nails.
Fixing a Jammed Nail
Let’s start with the most common problem: a jammed nail. Here’s what you need to do:
1. Safety First: Always point the nail gun in a safe direction. Never aim it at yourself or someone else.
2. Unload the Nail Gun: Remove any remaining nails from the magazine.
3. Remove the Jam: If the nail is visible, use a pair of pliers or a nail punch to gently tap it out. If it’s not visible, you might need to use a small screwdriver or a similar tool to carefully pry the nail out. Be patient and avoid using excessive force.
4. Inspect: Once the nail is out, take a look at the nail driver. Is there any debris stuck in there? If so, use a cleaning tool or a small brush to remove it.
5. Reassemble and Test: Carefully reassemble the nail gun and try firing a few nails. If it still jams, you may have a more serious issue.
Tackling Low Fuel
Next, let’s tackle the low fuel issue. Here’s the deal:
1. Check the Fuel Gauge: Most Paslode nail guns have a fuel gauge that indicates the fuel level.
2. Replace the Fuel Cell: If the gauge is low, it’s time for a new fuel cell. Make sure you’re using the correct type of fuel cell for your specific model.
3. Install the New Fuel Cell: Follow the instructions in your owner’s manual for installing the new fuel cell.
Unclogging the Nozzles
The final culprit in our trio of common Paslode problems is a clogged nozzle. Here’s how to deal with this:
1. Remove the Nozzle: Carefully detach the nozzle from the nail gun.
2. Clean the Nozzle: Use a small brush, a cleaning tool, or compressed air to remove any debris.
3. Inspect: Look for any damage or wear on the nozzle itself. If it’s worn out, you’ll need a new one.
4. Reattach the Nozzle: Once the nozzle is clean, reattach it to the nail gun.
Other Common Issues
We’ve tackled the big three, but there are other problems you might encounter with your Paslode nail gun.
1. The Nail Gun Won’t Fire
This could be due to a variety of issues:
Low Fuel (See the “Low Fuel” section above)
No Nails in the Magazine (Check the magazine and make sure it’s loaded)
Jammed Nail (See the “Jammed Nail” section above)
Safety Mechanism Engaged (Make sure the safety mechanism is disengaged)
Trigger Problem (The trigger could be damaged or out of adjustment)
2. The Nail Gun Fires, But The Nails Don’t Drive
This could be caused by:
Clogged Nozzle (See the “Clogged Nozzle” section above)
Damaged Nail Driver (The nail driver might be bent or broken)
Incorrect Nail Size (Make sure you’re using the correct size nails for your nail gun)
Low Air Pressure (Check the air compressor and make sure it’s providing adequate pressure)
3. The Nail Gun Fires, But The Nails Drive Crooked
This could be due to:
Loose or Damaged Parts (Inspect the nail gun for any loose parts or damaged components)
Clogged Nozzle (See the “Clogged Nozzle” section above)
Incorrect Nail Depth Setting (Adjust the depth setting to ensure the nails are driven to the correct depth)
4. The Nail Gun Leaking Air
This could be caused by:
Loose or Damaged Fittings (Check the fittings and connections for any leaks)
Worn-Out O-Rings (Replace any worn-out O-rings)
Damaged Fuel Cell (If the fuel cell is damaged, it could be leaking air)
Paslode Nail Gun Maintenance
To keep your Paslode nail gun running smoothly, it’s essential to practice regular maintenance.
Cleaning: Clean the nail gun regularly, removing any debris from the magazine, nail driver, and nozzle.
Lubrication: Use a light lubricant, like silicone spray, to lubricate moving parts.
Inspecting: Regularly inspect the nail gun for any signs of wear and tear.
Fuel Cell Maintenance: Replace the fuel cell when it runs low or shows signs of damage.
FAQs
Q: What type of fuel cell does my Paslode nail gun use?
A: The type of fuel cell your Paslode nail gun uses depends on the specific model. Consult your owner’s manual or the Paslode website for information on compatible fuel cells.
Q: How do I know if my Paslode nail gun is damaged?
A: Look for signs of wear and tear, loose parts, damaged components, or leaks. If you suspect damage, contact a Paslode service center for repair.
Q: What should I do if I can’t fix the Paslode nail gun myself?
A: If you’re not comfortable fixing your Paslode nail gun yourself, contact a Paslode service center or a qualified repair technician.
Stay Safe!
Remember, safety is always paramount when working with any power tools. Always wear safety glasses and gloves, and follow the manufacturer’s safety instructions carefully.
With a little care and attention, your Paslode nail gun can be a reliable partner for many years to come. Happy nailing!
See more here: How To Fix A Jammed Paslode Nail Gun? | How To Fix A Paslode Nail Gun
How to Service a Paslode Framing Gun – YouTube
527 subscribers. Subscribed. 1K. 316K views 7 years ago. PLEASE HIT THE SUBSCRIBE BUTTON!! Servicing your Paslode Framing Gun will keep it operating seemlessly and save YouTube
How To Service Your Paslode Cordless Framing Nailer To Get
How To Service Your Paslode Cordless Framing Nailer To Get The Best Performance!We show you how to get the best performance out of your paslode cordless fram… YouTube
How to service and repair a Paslode PPN50CI nail gun that
This paslode gun would not shoot at all and the pin was left sticking out. Classic sign that there is a problem with the reed valve inside the gun. Also a go… YouTube
Paslode Nail Gun Not Firing [Problems, Causes, and
In this comprehensive guide, we’ll delve into the common problems that can cause a Paslode nail gun to malfunction, explore their underlying causes, and provide practical solutions to troubleshoot and resolve these issues. Cordless Guy
Troubleshooting & FAQs | Paslode
Quick Fix. Check these six things to get your nailer immediately back to work—for more detailed instructions, check your nailer’s operating manual: 1. Check fuel cell expiration Paslode
The Most Common Paslode Nail Gun Troubleshooting Issues
The Most Common Paslode Nail Gun Troubleshooting Issues. Many of the faults and problems that occur on Paslode nail guns can be prevented by following these L&S Engineers
Paslode Nail Gun Problems & Causes – Kelvin Power Tools Blog
We asked our service experts to list the most common Paslode problems that they repair here at Kelvin Power Tools. They explain the possible causes for each problem, how Kelvin Power Tools
Paslode nail gun not firing? Here is what to check
Follow the following procedure (step by step) to fix your nailer: Check the wiring. Remove the nailer’s top cover and proceed to check the wires. You want to make sure that it is not shorted or broken (check all NailerPros
The 8-Step Guide to Unjamming your Nail Gun – Paslode
Clearing an obstructed nailer is simpler than you think. Our guide will help you find the right solution to fix your tool. SAFETY FIRST. Before addressing any issue Paslode ANZ
See more new information: charoenmotorcycles.com
Problem Solving A Paslode Nail Gun That Won’T Fire.
Paslode Im350/90 Nail Gun Repair And Service, Only Shooting One Nail And Leaves The Pin Out.
Repairing A Old Paslode Im350/90Ct Nail Gun. Compleat Service And Repair, Showing Every Step.
How To Clear A Nail Jam In The Paslode Powervent Framing Nailer
How To Service A Paslode Framing Gun
Repairing A Paslode Im350+ With A Faulty Motor.
Paslode Finish Nailer Won’T Fire Or No Spark Easy Fix Full Diasnostics And Repair
Service And Repairing A Paslode Im350+ Nail Gun That Misfires And Miss The Nails.
Repairing A Paslode F350S Framing Nailer
Link to this article: how to fix a paslode nail gun.
See more articles in the same category here: https://charoenmotorcycles.com/how